DTRO Module Series
The DT membrane module adopts a special open flow channel design, which consists of membrane cushion, disc plate, tie rod and housing. Raw water flows from the bottom up through the gap between housing and disc plate, and then enters disc plate through upper flange. Under pressure, water molecules pass through membrane cushion and flow out along the gap between tie rod and disc plate to form permeate.
Principle of operation and advantages
High recovery rate——Single module maximum recovery rate reachs 45%.
Simple membrane replacement——Membranes are individually replaceable, low maintenance costs.
Anti fouling and scaling——The convex design on the disc creates turbulence in the water, and the wide flow channel design with 1.2mm makes the product resistant to fouling and scaling.
Long service life——The service life of spiral wound module in a given scenario is up to 6 months, while the service life of NEWA module is 3-5 years.
产能充足:生产线产能大、效率高,全流程采用智能机器人装配,可实现500支/天,满足大型应急项目需求;大阳城集团娱乐游戏水环境产业园投产后,可新增膜组件产能1000支/天。
产品免检:生产线采用先进的4.0技术,采用机器人组装,视觉检测,产品合格率超过99.99%,质量稳定可靠,实现产品免检。
智能管理:生产全程采用数据监控,实现产品质量过程监控和问题可追溯。
干膜出厂:产品干膜出厂,与原料性能完全一致,膜组件使用寿命长,存放更久,同时避免了湿膜长菌和结冻,极大方便了工程应用。
价格优势:产品标准化、规模化生产,大幅降低DTRO生产成本,提高了各类项目选用DTRO工艺的经济性。